First Partial

Methods, ingredients, advice and equipment specific to all-grain (mash), partial mash (mini mash) and "brew in a bag" (BIAB) brewing.

Postby yardglass » Thursday Oct 13, 2005 4:01 pm

Dogger Dan wrote:
Use about 1 tsp Irish Moss in final 20 min of boil too, It will take away chill haze

Dogger


Cheers Dogger,
Going to give it a go tomorrow.
The Irish Moss isn't critical is it ?
My HBS would send me to the chemist (drug store) :wink: if i asked for it, can just hear her now ''We don't stock Cough Syrup'', same person who reccommended Sod Met in the Malt Extract. :shock:

thanks again :D
yardglass
excuse me... your karma just ran over my dogma.

GOOD BREWS
yardglass
 
Posts: 1072
Joined: Sunday Oct 09, 2005 7:40 am
Location: Brewing in the Shed.

Re: partial mash

Postby yardglass » Thursday Oct 13, 2005 8:40 pm

Herby wrote:hey yardglass,

The process you are describing is basically where I'm up to with my brewing, with a few exceptions.


If you can get some base malt instead of the crystal, and sort the bitterness issue out, you are very close to making some kick arse beers.

cheers
herby


hey herby,

I meant to ask you in my earlier post what improvements, bonuses you have noticed with your beers since you've been playing with grain.

Need to justify this extra work i suppose :roll: :wink:

cheers
yardglass
excuse me... your karma just ran over my dogma.

GOOD BREWS
yardglass
 
Posts: 1072
Joined: Sunday Oct 09, 2005 7:40 am
Location: Brewing in the Shed.

Postby Dogger Dan » Friday Oct 14, 2005 2:27 am

Yard Glass

I gues I should clear up chill haze

Your beer will be clear in the bottle, you put it in the fridge and it goes cloudy

It doesn't taste bad, it is just appearance

Dogger
"Listening to someone who brews their own beer is like listening to a religous fanatic talk about the day he saw the light" Ross Murray, Montreal Gazette
Dogger Dan
 
Posts: 3168
Joined: Thursday Aug 26, 2004 10:43 am
Location: Lucan, Ontario, Canada

improvements

Postby Herby » Friday Oct 14, 2005 6:31 am

Improvements are a fresher tasting brew that you have more control over and can customise to your likings. You can play around with different malts, different temps to extract different characteristics from the grain, and also play around with different hops (which you could do anyway, but the partial process really lends itself to it).

It's also a good way to develop your brewing knowledge further, and can easily be done with utensils you probably already own.

Give it a go
Herby
 
Posts: 14
Joined: Tuesday Nov 02, 2004 8:40 pm
Location: South Coast, NSW

Postby stevem » Friday Oct 14, 2005 6:58 am

Just a further question about steeping. I have seen quite a few recipes that say after you have steeped you pour the liquid into the fermenter. No mention of boiling. I believe it should be boiled but my question is, is the temp of 70 degrees C that you steep at high enough to kill off any nasties that may be in your grain?
Thanks
Cheers
Steve
stevem
 
Posts: 115
Joined: Monday Dec 13, 2004 7:40 pm
Location: Brisbane

Postby gregb » Friday Oct 14, 2005 7:21 am

FWIW - I've done both where I have boiled, or not boiled, with no noticable ill affects.

Cheers,
Greg
User avatar
gregb
Moderator
 
Posts: 2620
Joined: Saturday Sep 25, 2004 9:12 am
Location: Sydney

Postby Aussie Claret » Friday Oct 14, 2005 10:56 am

stevem,
From my limited knowledge you are supposed to steep the grains at around 70c for upto and hour. After you remove the grain, then boil to kill any nasties. Do not boil the grains as they can release tannins that are quite bitter.
Cheers
AC
Aussie Claret
 
Posts: 655
Joined: Thursday Sep 01, 2005 11:55 am
Location: Gold Coast

Postby yardglass » Saturday Oct 15, 2005 3:53 pm

this is what i went with,
500gm Crystal steeped (sp?) 30min
Coopers Bavarian
1kg Dry Malt
500gm Sunflower/Ironbark Honey
Cascade pellets
25gm Cracked Coriander
23gm w34/70
I boiled the lot for 30 min with hops @ 20min and 1min, Coriander @ 10min.
Pitched @ 22*, i've got it cooled off now to about 17*.
I pitched two sachets of w34/70 because i read somewhere that the proper ratio is 1gm per litre for dried yeast. I won't make a habit of it ( $$$ ).

The Boil smelt bloody awesome, just lifted the lid and the krausen looks like the head on a pint of Guiness.
Going to get my shit together now and do a proper Extract/Mash.

cheers :D
yardy
excuse me... your karma just ran over my dogma.

GOOD BREWS
yardglass
 
Posts: 1072
Joined: Sunday Oct 09, 2005 7:40 am
Location: Brewing in the Shed.

Postby MHD » Tuesday Dec 20, 2005 11:33 am

apologies for bring up such a long dead subject, but what did you end up doing for Hops?
Fermenting: Responsibly American Brown (Drink Responsibly) My first AG!
Bottled: Fuggles Larger/ale, Honey I'm Home Ale, Entropy Wheat, Dark Matter Ale, The Beer that Should Not Be (IPA)
MHD
 
Posts: 366
Joined: Sunday Nov 27, 2005 8:44 pm
Location: Canberra

Postby yardglass » Tuesday Dec 20, 2005 6:20 pm

MHD wrote:apologies for bring up such a long dead subject, but what did you end up doing for Hops?



beer never dies dude, no apologies please.

"doing for hops", is it weights ?
not sure what you're after here, so i'll go with this.

this recipe is pre digital scales, so all brewing notes are in tbsp measure, :shock: (you do what you can). :lol:

a rough estimate would be two additions (Cascade) of 12gm each @ the times i posted earlier.
10min into a 30min boil for #1, and #2 @ 1min before you turn the heat off.

this was a first for me in regards to honey and grain, minor effort = major results. :D

this really was(imo)a very nice grog, i've a similar one underway atm, only diff is temp control.

beers
yard
excuse me... your karma just ran over my dogma.

GOOD BREWS
yardglass
 
Posts: 1072
Joined: Sunday Oct 09, 2005 7:40 am
Location: Brewing in the Shed.

Postby MHD » Tuesday Dec 20, 2005 6:49 pm

Yep... it was the timings I was after...

Are you using a kit base this time...
I am thinking about doing an extract + grain brew.. ie doing my own hopping ....
Fermenting: Responsibly American Brown (Drink Responsibly) My first AG!
Bottled: Fuggles Larger/ale, Honey I'm Home Ale, Entropy Wheat, Dark Matter Ale, The Beer that Should Not Be (IPA)
MHD
 
Posts: 366
Joined: Sunday Nov 27, 2005 8:44 pm
Location: Canberra

Postby yardglass » Tuesday Dec 20, 2005 7:29 pm

yeah,
went with a Blonde( :roll: )and 12gm Hallertau @ start, the rest, the same.

jammed the hallertau in there because i think the blonde is not as hoppy as the Bav.

it's a long way from AG or even a Partial, but the diff it has, (imo) is well worth it.

let us know how it goes.

what yeast are you pitching btw?
excuse me... your karma just ran over my dogma.

GOOD BREWS
yardglass
 
Posts: 1072
Joined: Sunday Oct 09, 2005 7:40 am
Location: Brewing in the Shed.

Postby MHD » Tuesday Dec 20, 2005 8:06 pm

I'm keen to make an Ale so probably just safale...

Thinking something like:
1.5kg pale malt extract (or a kit)
500g of some sort of extract, probably dry malt extract
some amount of crystal malt steeped

POR hops for bittering
and cascade at the ends of the boil for aroma/flavour..

Also want to rack to dry whole POR hops in the secondary...

Still need to play with some numbers....
Fermenting: Responsibly American Brown (Drink Responsibly) My first AG!
Bottled: Fuggles Larger/ale, Honey I'm Home Ale, Entropy Wheat, Dark Matter Ale, The Beer that Should Not Be (IPA)
MHD
 
Posts: 366
Joined: Sunday Nov 27, 2005 8:44 pm
Location: Canberra

Postby yardglass » Tuesday Dec 20, 2005 8:51 pm

canbeera temps would be ok at the mo for an ale i'm surmising?

your recipe, i'd go a bit more on the LME, A Morgans Pale LME perhaps ?(for a kit + LME boil).
(the crystal adds bugger all to the OG)

i've never even sighted POR up here, let alone used them in a mix, so you're on your own with that dude.

my advice, when you hop into the secondary, make a Hop Tea in a Coffee Pot,(plunger), or steep them in a lge cup, strain, and rack onto them.

don't chuck them in dry, MO.

yard
excuse me... your karma just ran over my dogma.

GOOD BREWS
yardglass
 
Posts: 1072
Joined: Sunday Oct 09, 2005 7:40 am
Location: Brewing in the Shed.

Postby MHD » Wednesday Dec 21, 2005 5:44 am

humidity is very low so the whole wet towel technique works extremely well... had house temp of 26 and ferm temp of 18 one day :)


yeah, the recipie is under construction.... I thought POR would be an easy one to get being home grown...
Fermenting: Responsibly American Brown (Drink Responsibly) My first AG!
Bottled: Fuggles Larger/ale, Honey I'm Home Ale, Entropy Wheat, Dark Matter Ale, The Beer that Should Not Be (IPA)
MHD
 
Posts: 366
Joined: Sunday Nov 27, 2005 8:44 pm
Location: Canberra

Previous

Return to Grain brewing

Who is online

Users browsing this forum: No registered users and 13 guests