Page 1 of 1

How do you 'set' CO2 pressure?

PostPosted: Thursday Jun 13, 2013 5:44 pm
by Paulj
Hi all,

So I have recently got a keggerator system and got my first brew in there, I have just put it together and poured my first beer (yum yum) (I brew at ubrewit and they carbonated the kegs for me)

What I am confused about it how to set the CO2 pressure for pouring and leaving?
I have turned the CO2 valve on and the pressure went up, but after a couple of pours the pressure is staying at a constant 17ish psi for the last 15/20 mins since it has been connected.

I have tried turning off the pressure and then turning back on but the gauge stays put, what am I doing wrong?

Re: How do you 'set' CO2 pressure?

PostPosted: Thursday Jun 13, 2013 6:39 pm
by rotten
Your pressure should stay relatively constant. I set mine to 80 odd psi. Anywhere between 80-100 would be fine, personal preference though really. When the keg gets low I tend to not up pressure as it just creates more foaming, just be patient with the pour

Re: How do you 'set' CO2 pressure?

PostPosted: Thursday Jun 13, 2013 6:42 pm
by rotten
Also the guage won't change unless you release (purge air valve) or increase pressure. I also sometimes turn the gas off or just the current reg in use when keg starts getting low. Dual regs are awesome 8-)

Re: How do you 'set' CO2 pressure?

PostPosted: Thursday Jun 13, 2013 6:48 pm
by Paulj
rotten wrote:Your pressure should stay relatively constant. I set mine to 80 odd psi. Anywhere between 80-100 would be fine, personal preference though really. When the keg gets low I tend to not up pressure as it just creates more foaming, just be patient with the pour


You set the psi to 80psi to pour? I thought it should be between 11 and 17psi?

Ps yeah I purged the regulator (i feel like an idiot now) and it went down and I have set it at about 15psi for pouring?

Re: How do you 'set' CO2 pressure?

PostPosted: Thursday Jun 13, 2013 8:21 pm
by rotten
Hang on, KPA is what I meant :shock:

Re: How do you 'set' CO2 pressure?

PostPosted: Thursday Jun 13, 2013 8:25 pm
by rotten
80 psi = 11.6 psi. 100 psi = 14.5 psi.

My bad, been a long day

Re: How do you 'set' CO2 pressure?

PostPosted: Thursday Jun 13, 2013 9:06 pm
by barls
dont you mean 80kpa=11.6psi

Re: How do you 'set' CO2 pressure?

PostPosted: Thursday Jun 13, 2013 10:32 pm
by rotten
Like I said, Looooong day :lol:

I hope my muddled advice helped though...

Re: How do you 'set' CO2 pressure?

PostPosted: Thursday Jun 13, 2013 11:53 pm
by Paulj
Yea thanks

Re: How do you 'set' CO2 pressure?

PostPosted: Friday Jun 14, 2013 6:33 pm
by Oliver
Paulj,

That must be some sort of record ... joined in May 2005 and all three of your posts to date are in this thread!

Good to see you posting :-)

Cheers,

Oliver

Re: How do you 'set' CO2 pressure?

PostPosted: Friday Jun 14, 2013 7:11 pm
by Paulj
I know I have just been stalking everyone lol

No I joined originally as I started brewing with a coopers kit, and pretty much stopped for a few years

Now I have a keggerator and have done about 6 brews at ubrewit

Re: How do you 'set' CO2 pressure?

PostPosted: Monday Jun 17, 2013 10:15 pm
by Oliver
Well, good to have you back.

Oliver