. . . and alcoholic or non-alcoholic beverages other than beer and spirits. Post discussion on recipes, methods, equipment and the like about these drinks here.
Yesterday SPC factory sales had Goulburn Valley Pear Juice for $1.50/l so I bought a case to try an all juice pear cider. I keep saying it will be for SWMBO (but even I know that's a lie ).
Initial thoughts are 10l of juice, maybe some lactose to sweeten and pitch some yeast (and nutrient from old kit yeasts) Doesn't get any simpler than that.
I had planned on using a satchet of US-05 from the fridge, but the heat pad I use to control temp, (still haven't bought a temp controller and ferment fridge), is sitting under a stout at 18deg for the next couple of weeks. So I thought I might try some S-23.
Thoughts anyone?
12deg is easily maintained sitting on the bench in the shed at present.
From a completely uninformed and perhaps simplistic point of view (and on the understanding that I have had quite a few beers tonight), I would question whether this will make much of a difference.
There's not the mix of complex and simple sugars in juice that you'd find in wort, so the residual sugar question when it comes to ale v lager yeast is not really a consideration. I don't think.
Perhaps the perry using S-23 would be a little cleaner than one using US-05, but the latter is a pretty clean-fermenting yeast anyway.
My feeling: do it.
Of course, I could be talking out my arse, in which case I hope someone will correct me.
Of course, I could be talking out my arse, in which case I hope someone will correct me.
Thanks Oliver
Last night (after quite a few beers) I did put it down. My thoughts were "What's the worst that can happen? I'll make some form of drink "
As stated earlier, impatience was the main reason for using the Saflager, I couldn't wait for the heatpad to be free for use with an ale yeast.
Not much action when I looked earlier today, with just some condensation on the cling film to hint that it had kicked off. Will report back in a few weeks when I bottle.
10l SPC pear juice
500g lactose
Coopers kit yeast boiled in 2l to dissolve lactose
Topped up to 1045 OG (17l)
Saflager S-23
This bubbled away slowly for 2 weeks at 12deg before stopping at 1020.
So I stirred and raised temp to 18deg, no further movement. After another week I stirred again and pitched a wine yeast (SN9). It dropped to 1018 but has sat there for another week with no further action.
I've never done an all-juice cider or perry (always used kits), but I was expecting FG of 1005 or lower.
The SPC juice is a very thick juice, in a glass you can't see through it and a straw will stand in it if its really cold. Is it possible that other suspended solids are affecting FG and all sugars have been gobbled up?
The taste is not overly sweet, about where I expected for 500g of lactose in a 17l brew. My thoughts are that it's finished.
My 2c, it's finished. If you're adding lactose you obviously don't want it dry anyway. Stupid question, does the lactose ferment out completely anyway? Never used it so don't know.
rotten wrote:My 2c, it's finished. If you're adding lactose you obviously don't want it dry anyway. Stupid question, does the lactose ferment out completely anyway? Never used it so don't know.
Thanks Rotten
Correct, I didn't want it too dry (will be shared with SWMBO). The lactose doesn't fully ferment, leaving behind some sweetness. I've used lactose in all ciders and now this perry, except for version 1 which was too dry.
Hi guys. I'm new on the block and reading your posts with great interest. Also quite new at brewing so I'm sure that I have a lot of catching up to do.
To Planner! You make reference to cling film. Are you NOT using an airlock on your cider?
builttolast.
builttolast,
If the cider is fermenting right now, I would leave the lid and airlock on for this brew.
Go the glad wrap on your next brews !
It makes life a bit easier, you will love it !
Caught me in time. Have run out of cling wrap. Thanks a heap! There is no movement in the fermenter as yet! It's been about 30 hours and I'm thinking it may be the "cider yeast" purchased for the job. I opened it to do a trial in a 2 ltr flagon and stored it in the fridge for a week. Maybe that was a bit sloppy. What do you reckon??
Also, as far as removing some and creating your 2L tester goes.
I have never done that, others may have. As long as you were sanitary in your practices I suppose you will be ok ? !
).
"
