General homebrew discussion, tips and help on kit and malt extract brewing, and talk about equipment. Queries on sourcing supplies and equipment should go in The Store.
Test your hydro in water, RUM. The hydro should say on it what temperature it's calibrated to, so just throw it into that temperature (roughly) water and see if it reads 1.000.
EDIT: Fixed typo.
Last edited by bullfrog on Monday Oct 11, 2010 11:41 am, edited 1 time in total.
bullfrog wrote:Test your hydro in water, RUM. The hydro should say on it what temperature it's calibrated to, so just throw it into that temperature (roughly) water and see if it reads 0.000
A couple of degrees difference shouldn't alter your readings all too much, mate. With the reading that you got, if the hydro is wrong, at any rough room temperature the reading will be nowhere near 1.000. If it's really close to that though then your mystery is caused by something else.
Interesting blend of hops there, Rotten. I've never used Northern Brewer for anything other than a 60 minute addition. Let us know how it goes.
I've just kegged my first ESB(-esque) and my first DSGA. I also currently have one of my own Golden Ales on tap so I'm anxious to compare the two. I left the two brews that I kegged tonight to cold condition for a touch over a week, so I'm hoping that they'll be good to go pretty soon.
The two brews being kegged means I have two spots open in my fermentation fridge. Anybody got any suggestions on what I should brew next? I was thinking a Munich Dunkel for one (I've only ever brewed one by accident [failed stout which fit the MD guidelines much better than anything else]) but not sure on the other. Been some talk of Irish Reds recently, so I might try my hand at one of those.
EDIT: Just poured a glass of the bitter to test its carbonation (I force carb, modified Ross method) and it's lovely. The keg needs to settle a bit as it's a bit muddy but it's beautiful. I can see why people like Marris Otter. I also threw some amount (can't be arsed to look up my records) of naked oats into this brew and it has a wonderful mouth-feel. Coming in at a rat's pube under 6% abv, it's not the lightest beer going, but it hides the alcohol well.
Another Fat Yak will be my next brew. Plan is to build up some stock with a couple of fermenters going in the brew fridge at a common temp. Then I can muck around with some brews which have special temp requirements eg Belgian with temp increase throughout ferment.
Hi All,
Just had 2 days off work and managed to put the following down:
Morgans Blue Mountain Lager 1.7kg Can
Morgans Lager Pale Malt Extract 1.5kg Can
Dextrose 1kg.
Tea Bag of Nelson Sauvin Hops steeped in 300mls water, liquid / bag put into fermenter.
Ended up using the morgans yeast and seems to be going ok
Last edited by RUM57L on Thursday Oct 14, 2010 11:53 am, edited 1 time in total.
A while back morgans got rid of their 1kg range and changed all their extract tins to 1.5kg. If you have a 1kg tin its probably old stock. If you have the option you may like to look around and see if you can find fresher extract to work with. Apparently it can affect the flavour.
I think the yeast that comes with the Blue Mountain lager is Mauri 497. http://www.maurivinyeast.com/upload/mau ... %20497.pdf
Hadn't really looked at it before but could be a good option for lagers where you can't keep the temp down.