Mould on brew gear

Talk about methods, equipment and recipes for making brewed and distilled spirits at home.

Mould on brew gear

Postby Deigh » Wednesday Feb 01, 2012 10:58 am

Gotta problem with utensils and gear. Stuff comes out about once every six weeks and the shed changes into a spirit making frenzy ending up with about seven litres of whisky which is enough to keep me going for another six weeks! Afterwards everything is washed with a steriliser mixture, dried out and stacked under the table for another six weeks. This time everything came out with a nasty coat of blackish mould over everything and it took serious cleaning to get things back to a hygenic state. Some small items had to be dumped because they couldn't be cleaned.

It had not been a particularily damp six weeks so can't really understand why it happened so badly. NZ can be a bit high humidity wise so a small amount of mould is to be expected. Can anyone give me advice on how to avoid this in future? Could I stack everything in a large plastic bag and extract the oxygen from it or is there another way? :(
Deigh
 
Posts: 5
Joined: Wednesday Sep 28, 2011 9:05 am

Re: Mould on brew gear

Postby rotten » Wednesday Feb 01, 2012 8:13 pm

Gday mate.
Firstly do you clean with any products, or just rinse and sanitise?

I think you should simply clean and sanitise, dry all your gear thoroughly, and store in dry air-tight containers under your table. That should take care of the black mould, which isn't a good mould to have.

My 2c
Beer numbs all zombies !!!
User avatar
rotten
 
Posts: 976
Joined: Monday Mar 29, 2010 11:37 pm
Location: Somewhere in OZ

Re: Mould on brew gear

Postby squirt in the turns » Wednesday Feb 01, 2012 9:11 pm

+1 to thorough drying and use of airtight containers. Mould can't grow without moisture. There's no way to exclude oxygen from the environment.

You could pack your equipment with silica to absorb any moisture that does occur in your sealed containers. You can buy reusable canisters of it that change colour when they're saturated. You can then dry them out in an oven.
User avatar
squirt in the turns
 
Posts: 274
Joined: Thursday Dec 04, 2008 8:26 pm
Location: Gold Coast

Re: Mould on brew gear

Postby Deigh » Thursday Feb 02, 2012 12:25 pm

Gday mate.
Firstly do you clean with any products, or just rinse and sanitise?


I wash (well, seriously rinse) and sanitise with whatever is available at the moment. At the moment that is COPPERTUN No rinse steriliser. Don't have a lot of choice in this, I have to use whatever the local shop is selling.

Can't consider stacking equipement in airtight containers. No room for that. When everything is air dried I then stack smaller pails inside each other and then both inside the 25ltr container. All other bits and pieces go wherever they can be squeezed in. Could shove the whole lot in a large plastic bag and add a moisture absorber as you suggest.

Just as an idea....if before sealing the bag I inserted a lighted candle in a safe place, then oxygen would be extracted and the candle would extinguish itself! :lol:
Last edited by Deigh on Friday Feb 03, 2012 5:22 am, edited 1 time in total.
Deigh
 
Posts: 5
Joined: Wednesday Sep 28, 2011 9:05 am

Re: Mould on brew gear

Postby Horse Head Brewing » Thursday Feb 02, 2012 9:26 pm

Know it sounds a little girly but grab the missus hair dryer :wink: , give it a blast, wrap in plastic bags and store......all good :)
Horse Head Brewing
 
Posts: 53
Joined: Sunday Jan 15, 2012 7:48 am
Location: Ballarat, Vic

Re: Mould on brew gear

Postby Deigh » Friday Feb 03, 2012 5:26 am

Horse Head Brewing wrote:Know it sounds a little girly but grab the missus hair dryer :wink: , give it a blast, wrap in plastic bags and store......all good :)

Are you suggesting that my air drying routine is not adequate and all I need is an extra boost before stacking away? Is this all that is needed to prevent mould growth?
Anybody got any comment about the 'candle routine'?
Deigh
 
Posts: 5
Joined: Wednesday Sep 28, 2011 9:05 am

Mould on brew gear

Postby bullfrog » Friday Feb 03, 2012 5:53 am

Candle trick would be a PITA and perhaps not do too much. Plastic bags melt pretty easily, so you'd need some way to prevent the heat of the candle putting holes in it. Also, the major drama is with moisture, not oxygen, so it'd be a lot of messing around for not much gain.
bullfrog
 
Posts: 922
Joined: Tuesday Nov 17, 2009 5:26 pm
Location: The Hawkesbury, NSW

Re: Mould on brew gear

Postby Deigh » Saturday Feb 04, 2012 4:53 am

the major drama is with moisture, not oxygen,

Thanks, this is the sort of information I need, will concentrate more on drying containers and absorbing moisture .
Regards :D
Deigh
 
Posts: 5
Joined: Wednesday Sep 28, 2011 9:05 am


Return to Spirits

Who is online

Users browsing this forum: No registered users and 11 guests

cron