Mashmaster Fridgemate

newers · Post by **newers** » Friday Jun 09, 2006 9:34 am

I've just purchased a Mashmaster Fridgemate, a simple temperature controller that requires a little assembly.

I have no trouble understanding wiring diagrams and the one that comes with the fridgemate is no exception. However, i was wondering, for anyone that is using the Fridgemate, what sort of wire connectors did you use? I want to ensure the most solid and permanent connection possible due to this being a 240V application.

Cheers

Duane · Post by **Duane** » Friday Jun 09, 2006 10:32 am

Have been thinking of getting one of these myself.
Best bet is to get on to AHB and ask Brizzybrew, he is the seller of these items. Also want to get one of his refractometers, $57 is bloody cheap!

Tipsy · Post by **Tipsy** » Friday Jun 09, 2006 8:38 pm

Has anyone used one of these? Newers can you let us know how it goes when its up and running?
Might invest in one myself

Krusty · Post by **Krusty** » Tuesday Jun 13, 2006 12:46 am

From what I can tell from reading the instructions, I would use a screw type insulated connector, known in the industry as a "bluepoint" connector and then wrap it with some electrical tape. This is as long as it's not going to be somewhere that's likely to get wet or knocked about. If it is, let us know and I'll suggest something else.
If you know a sparky, they'll give you one for free. If you go to bunnings, they will sell you a pack of 10 or so for $2 or something, which is a rip off. But I take it you don't know a sparky, or you wouldn't be asking...

newers · Post by **newers** » Tuesday Jun 13, 2006 9:41 am

Cheers Krusty,

I have indeed used a screw type insulated connector, so it's good to read you backed up my instincts. I will be electrical taping tonight to ensure a stable and secure connection. From there I will test and let you guys know what it's like...

T-Bone · Post by **T-Bone** » Tuesday Jun 13, 2006 8:25 pm

I received mine today and have put it together this evening. It seems to work just as planned. I mounted mine in a plastic box (from DSE) so that all wiring was contained and neat. It's controlling my belt heater as I type this (I plan to use it with a fridge in summer).
Best $40 I've spent on brewing.

Timmsy · Post by **Timmsy** » Wednesday Jun 14, 2006 8:04 am

What are the deal with these? CAn you control the temp in a fridge or cupboard? IS that the deal?

newers · Post by **newers** » Wednesday Jun 14, 2006 9:10 am

Timmsy, it's simply a power controller that is wired inline between an electrical appliance (fride, heater, heat belt etc.) and power source, that turns the appliance on and off to keep the area in which the controllers temperature probe is located at a set temperature.

It involves a small amount of wiring and shouldn't be attempted by anyone with little to no electronics experience, due to the 240V (Aus) application. People with car audio, basic electronic kit etc. experience shouldn't have any trouble though.

Cheers

Mishkin · Post by **Mishkin** » Friday Sep 08, 2006 2:21 pm

Hi guys. I just bought one of these bad boys and I'm attempting to wire it up at the moment. Can someone please post a picture of what their wiring looks like just so I can double check. Or send the picture to my e-mail. agp_min@hotmail.com

thanks

mikey · Post by **mikey** » Friday Sep 08, 2006 5:32 pm

How do these compare to the ones that are simply plug in types? The plug in types from what I understand are simply more expensive.

lethaldog · Post by **lethaldog** » Friday Sep 08, 2006 6:18 pm

These are plug in its just that you have to wire it yourself and its relatively easy, just study the instructions for a little while and you will get it