Reflux still

Talk about methods, equipment and recipes for making brewed and distilled spirits at home.
Post Reply
spud1700
Posts: 7
Joined: Monday Jun 06, 2011 9:01 pm

Reflux still

Post by spud1700 »

Hi All,

Had a bit of a read of the forum threads, atached is a photo of two of my stills, one is two inch the other is three inch. Both Condensor Controlled Stills, the three inch has just been built, need to do the condensor done when I get back home and it'll be ready to go. The two inch pulls a ltr and hour of 95% and the three inch will pull over three ltrs and hour of 95%.

I saw a few posts about going blind and people dieing :shock: that is from people trying to sell off denentured alcohol etc. Your not going to have problems unless your a bit of a goose when you are distilling.

Make decent cuts (seperate heads, hearts and tails) and you won't need to filter your product :)

OK silly question how do I post photos? :oops:
User avatar
Tipsy
Posts: 1463
Joined: Saturday Jun 18, 2005 12:49 am
Location: Sth. Gippsland, Victoria

Re: Reflux still

Post by Tipsy »

User avatar
McStill
Posts: 11
Joined: Friday Jun 03, 2011 6:19 pm
Contact:

Re: Reflux still

Post by McStill »

Hi Spud,

You insert a pic like this :lol:

Image
User avatar
McStill
Posts: 11
Joined: Friday Jun 03, 2011 6:19 pm
Contact:

Re: Reflux still

Post by McStill »

Or you could do it like this Spud

Image

:mrgreen: :mrgreen: :mrgreen:
spud1700
Posts: 7
Joined: Monday Jun 06, 2011 9:01 pm

Re: Reflux still

Post by spud1700 »

Tipsy,

Thanks for the link, McStill thanks for posting the photos, the two stainless stills in the last post are mine :)

Very easy design to build, easy to run, efficient and a very simple design.
User avatar
McStill
Posts: 11
Joined: Friday Jun 03, 2011 6:19 pm
Contact:

Re: Reflux still

Post by McStill »

But these are so much nicer :mrgreen:

Image

LOL
User avatar
Tipsy
Posts: 1463
Joined: Saturday Jun 18, 2005 12:49 am
Location: Sth. Gippsland, Victoria

Re: Reflux still

Post by Tipsy »

McStill wrote:Hi Spud,

You insert a pic like this :lol:

Image
Hi McStill, could you please tell me what I am looking at here? (I do know it's a still :wink: )
What's on the column?
User avatar
McStill
Posts: 11
Joined: Friday Jun 03, 2011 6:19 pm
Contact:

Re: Reflux still

Post by McStill »

G'day Tipsy,

That is a bubble plate column with sight glasses, it's a small version of a commercial still made by Holstein.

These stills are perfect for making flavored drinks like whiskey, grappa, rum etc, more info here http://bavarianbrewerytech.com/potstills/index.htm

You can also see this rigs build as it progressed here http://www.aussiehomedistiller.com/bubb ... html#p1093

These stills produce a high flavor profile and high ABV% in a single distillation while compressing heads and tails, this gives a much larger hearts cut than a traditional pot still.

Cheers.
spud1700
Posts: 7
Joined: Monday Jun 06, 2011 9:01 pm

Re: Reflux still

Post by spud1700 »

McStill wrote:But these are so much nicer :mrgreen:

Image

LOL

Ok you do have me there but could you use yours to club a a baby fur seal to death then give it a rinse and use it as a still again :) (note - I haven't used mine to club anything to death but I could :lol: )
User avatar
McStill
Posts: 11
Joined: Friday Jun 03, 2011 6:19 pm
Contact:

Re: Reflux still

Post by McStill »

I could club anything I want with that, it's not called a THUMPER for no reason :mrgreen:
Post Reply