Newcastle Brown question

General homebrew discussion, tips and help on kit and malt extract brewing, and talk about equipment. Queries on sourcing supplies and equipment should go in The Store.
Post Reply
andyzed
Posts: 49
Joined: Friday Jul 20, 2007 9:05 pm
Location: sydney
Contact:

Newcastle Brown question

Post by andyzed »

Gday all

I've got a mate that doesn't have access to the net and he has a prob with his Newc Brown brew.

It's been in the fermenter for about 7 days and whilst he has seen some action going on there hasn't been any real bubbling in the airlock. Whilst the water levels were uneven they have come back to being level in the airlock and he's now wondering if it is done fermenting or if because it's newc brown that it doesn't have a lot of activity anyway. He has broken his hydrometer and can't do a measure so any feedback other than that as a solution would be much appreciated.

i think if he has seen action that it's just that he has an air leak somewhere else and that it has probably fermented ok anyway. What does everyone else think??

Cheers
when talking to a fool, make sure they aren't doing the same
Kevnlis
Posts: 3380
Joined: Tuesday Jul 10, 2007 5:15 pm
Location: B-Rat
Contact:

Re: Newcastle Brown question

Post by Kevnlis »

andyzed wrote:i think if he has seen action that it's just that he has an air leak somewhere else and that it has probably fermented ok anyway. What does everyone else think??
I agree with the air leak theory. To test for an air leak push lightly on the fermentor lid to "unbalance" the water and see if it levels itself. If it stays unbalanced then you are probably OK. If it doesn't then try a little petrolium jelly around the top of the fermentor before you put the lid on or use glad wrap.
Prost and happy brewing!

Image
O'Brien Gluten Free Beer
User avatar
drsmurto
Posts: 3300
Joined: Friday Nov 17, 2006 11:53 am
Location: Adelaide Hills

Post by drsmurto »

Read THIS

Newky brown or the broon. On my ever increasing lists of beers to brew, think i have about 10 years worth on the list so far without repeats......
User avatar
Boonie
Posts: 1760
Joined: Friday Jul 21, 2006 6:41 pm
Location: Lake Macquarie

Post by Boonie »

Agree air leak, squeeze the keg, levels out=leak.

What do I think??, I think your mates not having a good run, no net, no hydrometer and beer keg not sealing. :wink:

Tell him to buy another hydrometer, it's the safest way to avoid Beer Bombs.

Cheers

Boonie
A homebrew is like a fart, only the brewer thinks it's great.
Give me a flying headbutt.......
User avatar
drsmurto
Posts: 3300
Joined: Friday Nov 17, 2006 11:53 am
Location: Adelaide Hills

Post by drsmurto »

Is this like the old - "my mate has this unexplained swelling and itching in his jocks...." or am i just reading to much into this on a friday arvo waiting for beer o'clock to roll around?
User avatar
James L
Posts: 1045
Joined: Thursday Jun 07, 2007 10:11 am
Location: Perth WA

Post by James L »

Beer O'clock never comes quick enough does it......
Image
I freely admit that I was Very Very Drunk....
"They speak of my drinking, but never consider my thirst."
andyzed
Posts: 49
Joined: Friday Jul 20, 2007 9:05 pm
Location: sydney
Contact:

Post by andyzed »

thanks everyone. btw he probably does have an itch in his jocks, he's not the cleanest bastard.
when talking to a fool, make sure they aren't doing the same
User avatar
Trough Lolly
Posts: 1647
Joined: Friday Feb 16, 2007 3:36 pm
Location: Southern Canberra
Contact:

Post by Trough Lolly »

The only way to take the guesswork out of this problem is to buy or borrow a hydrometer...
Image Image
andyzed
Posts: 49
Joined: Friday Jul 20, 2007 9:05 pm
Location: sydney
Contact:

Post by andyzed »

yeah i've been telling him that, i spoke to him this arv and he was going to get one.

cheers
when talking to a fool, make sure they aren't doing the same
User avatar
Trough Lolly
Posts: 1647
Joined: Friday Feb 16, 2007 3:36 pm
Location: Southern Canberra
Contact:

Post by Trough Lolly »

Beaudy...but from what you wrote, I'll bet that it's done and ready to be bottled.

Cheers,
TL
Image Image
andyzed
Posts: 49
Joined: Friday Jul 20, 2007 9:05 pm
Location: sydney
Contact:

Post by andyzed »

yeah thats what i was thinking too.
when talking to a fool, make sure they aren't doing the same
Post Reply